CORE
HOLDERS
The design is compact and adopted for good X-ray transparency. The RSS coreholder is custom made and individually adapted to fit requested specifications. Following information gives an example for one of our versions. Design and documentation in accordance with PED 2014/68/EU.
Features, and options:
Core sample Ø12mm, length 20mm-100mm, bi-axial overburden, one floating end piece.
A variety of end pieces, 1, 2 or 3 flow lines.
Heating jacket or OB hot oil recirc, 100°C
PEEK in all process wetted items
Main body and end piece in a variety of material, normally PEEK for best X-ray transparency.
1/16” flow lines
Sturdy fixture adapted for the CT stage
MAWP 100 bar (option 350bar)
RSS model 05CH-01MK5 with Mounting Fixture & Sequence:
This coreholder is designed for general versatile use for reservoir conditions studies and is X-ray transparent. CE compliant by third part verifcation available upon request.
STANDARD VERSION
MAWP Standard model: 470 bar @ 150 ºC
MAWP HPHT model: 700 bar @ 150 ºC
Material Core-Holder Body: Carbon composite/Aluminum
Material process wetted parts:SS 316, optional HastelloyC
Port configuration:AE W125, dual or triple
Material ring nut: Aluminum-bronze
Coreholder vessel size: Ø 100 mm x L 500mm
Maximum core length: 300 mm (option availabe)
Electrical insulated floating piston: Yes
Core diameter: Ø38 mm (1,5”)
Carbon Composite with Axial Pressure Ports
RSS model 05CH-11MK2M: Core holder with multiple axial pressure ports designed for good X-ray transparency.The design is compact and adopted for good X-ray transparency. The RSS composite coreholder is custom made and individually adapted to fit requested specifications. Following information gives an example for one of our versions.
Technical specifications:
Maximum working pressure: 500 bar @ 100 °C (optional 700bar)
Main body size: Ø110 mm x L 500 mm
Material process wetting parts: AISI316, Hastelloy or Titanium
Electrical insulated floating piston: Yes
Material in scan zone: Carbon fiber and aluminum liner
Process port configuration: AE 1/8” speedbite W125
Overburden AE 1/8” speedbite W125 or other, fluid oil
Core size, Ø38mm, L300mm
Standard bi-axial
RSS model: 05CH-03STD38
This coreholder is designed for general versatile use, and is prepared for reservoir conditions, and optionally also as X-ray transparent. A handy core mounting fixture is available, and makes this core-holder to be a good choice in test programs with several core samples in parallel, such as a porous plate PcRi program. Design and documentation in accordance with PED 2014/68/EU.
MAWP Standard model: 470 bar @ 150 ºC (optional 700 bar)
Material Core-Holder Body: Steel (Optional Aluminum for ISSM Service)
Material process wetted parts:SS 316, optional HastelloyC-276, Inc-625)
Port configuration:AE W125, single (option dual)
Material ring nut: Aluminum-bronze
Coreholder vessel size: Ø 72 mm x L 220 mm
Maximum core length: 100 mm (option availabe)
Electrical insulated floating piston: Yes
Core diameter: Ø38 mm (1,5”) (Option 1")
Quick Load - Hassler Type
RSS Model: 05CH-02QL38
The RSS quick load coreholder is based on the Hassler principle, with an adjustable axial piston and a quick connect loading port. Radial pressure is either supplied by nitrogen gas or hydraulic fluid. The coreholder is supplied with a bench top stand, also suitable for vertical mounting.
Quick Load - Bi-Axial
RSS Model: 05CH-22QLA38
The RSS bi-axial quick load core-holder is with a separate axial hydraulic piston ensuring same overburden pressure both axially and radially. Overburden pressure is either supplied by nitrogen gas or hydraulic fluid.
The core-holder is equipped with a quick connect lock enabling quick and easy swapping of core samples. A push rod makes unloading of samples easier. Difference in the length of the samples is adjustable, and covers any length up to 100mm. The core-holder is supplied with a bench top stand, also suitable for vertical mounting.
STANDARD VERSION
Pressure: Up to 413 bar / 6000 psi
Temperature: Up to 90 °C
Port configuration: Autoclave Speedbite W125
Inlet and outlet: Single or dual 1/8” lines, fluid distribution groves
Length incl. pushrod: Diameter 70mm x Length 450mm for core L 100mm
Materials: Wetted parts AISI 316, optional HC or Inconel
Sleeve: Øi38mm, Viton
Bi-Axial Core Holder 1.5" Endcap One Side
RSS model: 05CH-13AL63 CT-PET
Compact design and adopted for optimum X-ray transparency. Inlet and outlet are arranged in one end, making mounting of sample easier, and unit is easier to handle in the scanner gantry. The RSS CT/PET core holder is normally custom made and individually adapted to fit requested specifications. Above illustration is an example taken from one of our existing designs. Design and documentation is in accordance with PED 2014/68/EU.
Technical specifications:
Maximum working pressure: 200 bar @ 100 °C (optional available)
Main body size: Ø90 mm x L 200 mm
Material process wetting parts: PEEK
Electrical insulated floating piston: Yes
Material in scan zone: aluminum
Process port configuration: AE 1/8” speedbite W125
Overburden AE 1/8” speedbite W125
Core size, Ø38mm, L 100mm
Core Holder with Axial Pressure Ports (1")
RSS model: 05CH-13AL63
The design is compact and adopted for good X-ray transparency. The RSS aluminum coreholder is custom made and individually adapted to fit requested specifications. Following information gives an example for one of our versions. Design and documentation in accordance with PED 2014/68/EU.
Technical specifications:
Maximum working pressure: 100 bar @ 100 °C (option available)
Main body size: Ø90 mm x L 400 mm
Material process wetting parts: AISI316, Hastelloy or Titanium
Electrical insulated floating piston: Yes
Material in scan zone: aluminum
Process port configuration: AE 1/8” speedbite W125
Overburden AE 1/8” speedbite W125 or other, fluid oil
Core size, Ø38mm, L 270mm
CT Core Holder Ø1", L100mm, 7000psi
RSS model: 05CH-14AL32
The design is compact and adopted for good X-ray transparency. For better transparency thin-walled versions also available (with lower pressure rating). The RSS aluminum coreholder is custom made and individually adapted to fit requested specifications. Following information gives an example for one of our versions. Design and documentation in accordance with PED 2014/68/EU.
Features, and options:
Core sample Ø1”, length 100mm, Bi-axial overburden, floating end piece.
A variety of end pieces, single or dual flow lines, and a separate line for differential pressure.
Heating jacket, 30-100°C
End piece in a variety of material, normally PEEK for full X-ray transparency.
Electrical insulated floating piston: Yes
1/8” or 1/16” flow lines (dependent of needed flexibility, due to the CT rotating stage)
Main body aluminum, optionally composite for higher pressure/better transparency
Sturdy fixture adapted for the CT stage MAWP 7000 psi ( optional design available)
Micro Core Holder - Hassler Type
RSS model: 05CH-07-MiS-Hassler
The RSS micro coreholder is custom made and individually adapted to fit requested specifications. Following information describes on one of our versions, made for a micro-CT scanner. Optional X-ray transparent materials: aluminum, PEEK, carbon fiber, beryllium.
Technical specifications:
Maximum working pressure: 100 bar @ 100 °C, (optionally higher)
Main body size: Ø30 mm x 100 mm (D x h)
Material process wetting parts: natural PEEK
Port configuration: 10-32 Upchurch coned, 1/16-inch tubing Core size, Ø10mm
The coreholder comes with three inlet and three outlet ports plus overburden port both ends. Different flow paths can be arranged for the individual end platen, three inlets give flexibility. Individually end platens for e.g. two fluid inlet and differential pressure or a groove for particle buildup (filtrate).
Micro Core Holder - Bi-Axial, endcap one side
RSS model: 05CH-08MiC micro compact
RS Systems provide a wide range of standard and tailor-built coreholders. However, most X-ray transparent coreholders are tailor built to meet specific criteria. This is critical for optimizing versus a micro-CT, with restrictions in available space and the need of low attenuation materials.
The shown sketch below describes one of our base designs. Inlet, outlet, and overburden ports are in the bottom body, ensuring easy mounting and with minimum conflict versus the X-ray scanner. Options, double inlet or outlet lines, and flow ports in the top of the core holder.
Typical issues to check before ordering:
Scanner vs core holder body geometry conflicts
Coreholder fixture adaptor for specific CT stage
Core diameter/length and start position above core holder bottom
Flow lines, 1/32” or 1/16”, port type and configuration
Temperature and pressure specifications
Body material PEEK natural or fiber reinforced
Maximum wall thickness, other special needs
Rubber sleeve material, Viton or other
A standard delivery will include pressure test certificates and material certificates for each specific core holder.
Micro Core Holder - Ø6mm, L20-100mm
RSS model: 05CH-17MiLR coreholder
The design is compact and adopted for good X-ray transparency. The RSS coreholder is custom made and individually adapted to fit requested specifications. Following information gives an example for one of our versions. Design and documentation in accordance with PED 2014/68/EU
Features, and options:
Core sample Ø6mm, length 20mm-100mm, bi-axial overburden, one floating end piece.
A variety of end pieces, single or dual flow lines.
Heating jacket or OB hot oil recirc, 100°C
PEEK in all process wetted items
Main body and end piece in a variety of material, tailor made for specific needs
1/16” flow lines, endcap with up to 4 ports Optionally Beryllium alloy for higher pressure/temperature
Sturdy fixture adapted for the CT stage
MAWP 100bar (optional 240bar)
Micro Core Holder - Ø12.5mm, L20-100mm
RSS model: 05CH-23 Ø12.5 Coreholder